Vitus 45 Degree Heavy Duty Hinge
Item # 27851
Please Choose Or Scroll Down For More Info:
Starting at: $4.99
45 Degree Click On Euro Hinge
18mm Crank Heavy Duty with Press-in Dowels
- 18mm crank
- 105 degree opening angle
- 1-stop action
- Hinge and plate provide 6-way adjustability
- Cold rolled steel with nickel plating
- 45mm boring pattern
- Recommended for use with 600 series 0mm mounting plate
Do I need Press-on or Screw-on hinges?
Standard hinge installation screws work well in solid wood stock and plywood, but screws lose strength in medium density fiberboard (MDF) or particleboard. If your cabinet doors or cases are made from these materials, you may want to choose hinges that include barbed plastic inserts that fit in predrilled holes. Tightening the installation screw pushes each dowel against the wall of the hole for a firm grip.
|Back side of press-on hinge - note the dowels
|Back side of screw-on hinge - no dowels
|Cabinet door prepared for press-on hinges
|Cabinet door prepared for screw-on hinges
|Note: The press-on type hinge was developed for the manufacturers as a way to automatically align hinges and place them on the cabinet door in the proper location by just "pressing" them into the holes. The dowels in that case are already mounted. If you are replacing this type of hinge, you can get either type of hinge and either use the new dowels (which are already attached to the hinge) or you can use the screw-on and just use the screws already in your doweled door.
Minimum order 2