Vitus Hinge Mounting Plates

Item # 12295


Please Choose Or Scroll Down For More Info:




Starting at: $0.85  / Each

Add to Cart:

Product Description

Vitus Hinge Mounting Plates

110° Hinge Mounting Plate for Face Frame Construction

  Description 0 mm 3 mm 6 mm 9 mm
Face Frame Hinge Mounting Plate 400.3453 Material:  Zinc die cast, nickel plated
Sold without screws
Use #6 x 5/8" flat head wood screw
Height adjustment:  +/- 3.5mm
400.3453
200/cs
400.3454
200/cs
400.3455
200/cs
 
Face Frame Hinge Mounting Plate 400.3456 Material:  Zinc die cast, nickel plated
Sold without screws
Use #6 x 5/8" flat head wood screw
Wrap around designed for MDF/plywood
face frames where 4 screws are needed
to prevent screw pull out
Height adjustment:  +/- 3.5mm
  400.3456
200/cs
   
Face Frame Hinge Mounting Plate 400.3458 Material:  Zinc die cast, nickel plated
Sold without screws
Use #8 x 3/4" pan head wood screw
Designed for inset applications using
9mm crank hinges
Height adjustment:  +/- 3.5mm
      400.3458
200/cs

125° Hinge Mounting Plate for Face Frame Construction

    0 mm 3 mm 6 mm 9 mm
Face Frame Hinge Mounting Plate 400.3713 Material:  Zinc die cast, nickel plated
Sold without screws
Use #6 x 5/8" flat head wood screw
Height adjustment:  +/- 3.5mm
400.3713
200/cs
400.3714
200/cs
400.3715
200/cs
 
Face Frame Hinge Mounting Plate 400.3723 Material:  Zinc die cast, nickel plated
Sold without screws
Use #6 x 5/8" flat head wood screw
Cam height adjustment:  +/- 3.5mm
400.3723
200/cs
400.3724
200/cs
   

These hinge mounting plates will fit Jfh Hinges, Lama hinges, Titus hinges and Vitus hinges.

Selection of the hinge mounting plate will determine the amount of "overlap" or "overlay" of a cabinet door.

To determine plate requirement:

0mm = 3/4" overlay using our full overlay hinge, 3/8" using a half overlay hinge
(May be marked as 400.3453 on underside)

3mm* = 1/2" overlay using our full overlay hinge, 5/16" using a half overlay hinge
(May be marked as 400.3454 on underside)

6mm = 3/8" overlay using our full overlay hinge, 1/4" using a half overlay hinge
(May be marked as 400.3455 on underside)

-OR-
You can measure the thickness of the plate like this:

0MM 3MM 6MM
0MM mounting plate 3MM mounting plate 6MM mounting plate
1/4" thick   3/8" thick  1/2" thick 

"How to" page for calculating hinge overlay

Screws are not  included

Sold each, minimum purchase 4

*Most Common" Plate is the 3mm