Original Jfh Clip On Or Long Arm Hinge
Concealed Screw-on hinge for frameless or face frame cabinets
These are original Jfh long arm hinge. Jfh was widely used in the cabinet industry for many years and were installed in countless kitchen cabinets.
We these "hard to find" Jfh hinges and we offer them as direct replacements for your Jfh hinge.
These full overlay 110° hinges with their mounting plates (sold separately) can be used in either a frameless cabinet or on face frame cabinet . These high quality hinges just clip on to the mounting plates which are mounted on the cabinet. This makes placement and removal of the doors extremely convenient. Our Lama hinge plates are a great replacement and are available in 0, 3 and 6mm thicknesses.
This Jfh hinges is the screw on model. If you need "press in dowels" for mounting, you can add them in the pulldown menu at the top of the page. Dowels include the special screws and both dowels and screws are shipped loose.
Do I need Press-on or Screw-on hinges?
Standard hinge installation screws work well in solid wood stock and plywood, but screws lose strength in medium density fiberboard (MDF) or particleboard. If your cabinet doors or cases are made from these materials, you may want to choose hinges that include barbed plastic inserts that fit in predrilled holes. Tightening the installation screw pushes each dowel against the wall of the hole for a firm grip.
|Back side of press-on hinge - note the dowels||Back side of screw-on hinge - no dowels|
|Cabinet door prepared for press-on hinges||Cabinet door prepared for screw-on hinges|
|Note: The press-on type hinge was developed for the manufacturers as a way to automatically align hinges and place them on the cabinet door in the proper location by just "pressing" them into the holes. The dowels in that case are already mounted. If you are replacing this type of hinge, you can get either type of hinge and either use the new dowels (which are already attached to the hinge) or you can use the screw-on and just use the screws already in your doweled door.|
To determine mounting plate size:
0mm = 3/4" overlay(amount that the cabinet door overlaps the opening) using our full overlay hinge, 3/8" using a half overlay hinge (May be marked as 244.3653 on underside)
3mm = 1/2" overlay(amount that the cabinet door overlaps the opening) using our full overlay hinge, 5/16" using a half overlay hinge (May be marked as 244.3654 on underside)
6mm = 3/8" overlay(amount that the cabinet door overlaps the opening) using our full overlay hinge, 1/4" using a half overlay hinge (May be marked as 244.3655 on underside)
|1/4" thick||3/8" thick||1/2" thick|
Screws are not included but may be added above
Mounting plates and screws are sold seperately and may be selected above.
This hinge requires a mounting plate.
Mounting plates and screws are sold seperately.
Minimum order 4
Questions? Visit the Cabinet Hinge Glossary
Special Handling Charges for Oversize Products
Shipping companies do charge extra for "oversize" packages or packages that exceed certain lengths or other measurements.
If your product is going to incur additional charges, we will get a shipping quote prior to finalizing your order. The shipping shown on your order may or may not include these "oversize" charges. We will notify you prior to placing your order in production.
FedEx Oversize Packages
Packages that weigh 150 pounds or less and exceed 108 inches in length or 130 inches in girth (2 x width) + (2 x height) are considered “oversize” packages. Oversize packages are rated based on the greater of the package's actual rounded weight or dimensional weight. All oversize packages will have a minimum billable weight of 90 pounds in addition to any oversize package surcharge(s). As of 2020, this surcharge will be $120 per oversize package.
Fedex Peak Oversize Package Surcharge
During peak shipping season (10/21/19 until 1/5/2020), any package shipped during this period will incur an additional "Peak Oversize" charge of $37.50 per oversize package.
UPS Oversize Packages
A Large Package Surcharge will be applied to each UPS package when its length plus girth [(2 x width) + (2 x height)] combined exceeds 130 inches, but does not exceed the maximum UPS size of 165 inches. Large Packages are subject to a minimum billable weight of 90 pounds in addition to any oversize package surcharge(s). As of 2020, this surcharge will be $115 per oversize package.
Address Changes for FedEx and UPS
Both FedEx and UPS charge for address changes and corrections. The charge for an address change is a minimum of $16.00 as of 1/1/2019. Please check your shipping address on your order confirmation to insure that it is correct. The Cabinet Guy/QuikDrawers is not responsible for incorrect addresses.
If you have any specific questions, let us know or refer directly to the carrier websites for more information.