Vitus Hinge Mounting Plates

110° Hinge Mounting Plate for Face Frame Construction
	Description	0 mm	3 mm	6 mm	9 mm
	Material:  Zinc die cast, nickel plated Sold without screws Use #6 x 5/8" flat head wood screw Height adjustment:  +/- 3.5mm	400.3453 200/cs	400.3454 200/cs	400.3455 200/cs
	Material:  Zinc die cast, nickel plated Sold without screws Use #6 x 5/8" flat head wood screw Wrap around designed for MDF/plywood face frames where 4 screws are needed to prevent screw pull out Height adjustment:  +/- 3.5mm		400.3456 200/cs
	Material:  Zinc die cast, nickel plated Sold without screws Use #8 x 3/4" pan head wood screw Designed for inset applications using 9mm crank hinges Height adjustment:  +/- 3.5mm				400.3458 200/cs
125° Hinge Mounting Plate for Face Frame Construction
		0 mm	3 mm	6 mm	9 mm
	Material:  Zinc die cast, nickel plated Sold without screws Use #6 x 5/8" flat head wood screw Height adjustment:  +/- 3.5mm	400.3713 200/cs	400.3714 200/cs	400.3715 200/cs
	Material:  Zinc die cast, nickel plated Sold without screws Use #6 x 5/8" flat head wood screw Cam height adjustment:  +/- 3.5mm	400.3723 200/cs	400.3724 200/cs

These hinge mounting plates will fit Jfh Hinges, Lama hinges, Titus hinges and Vitus hinges.

Selection of the hinge mounting plate will determine the amount of "overlap" or "overlay" of a cabinet door.

To determine plate requirement:

0mm = 3/4" overlay using our full overlay hinge, 3/8" using a half overlay hinge
(May be marked as 400.3453 on underside)

3mm* = 1/2" overlay using our full overlay hinge, 5/16" using a half overlay hinge
(May be marked as 400.3454 on underside)

6mm = 3/8" overlay using our full overlay hinge, 1/4" using a half overlay hinge
(May be marked as 400.3455 on underside)

-OR-
You can measure the thickness of the plate like this:

0MM	3MM	6MM
1/4" thick	3/8" thick	1/2" thick

"How to" page for calculating hinge overlay

Screws are not  included

Sold each, minimum purchase 4

*Most Common" Plate is the 3mm